Chat with us, powered by LiveChat

LED Lighting Retrofit Online Specialists

Call Toll Free 800.541.5006
4 Foot LED T8, Replaces 45 Watt Fluorescent, Ballast By-Pass, Using only 18 Watts, DLC Listed, 5PAck.
LED four foot LED T8 tube can fit existing fixtures by-passing/removing current ballast. Great feature in that LED Tube can be rewired ballast by-pass as a single or double ended wire power connection. Our LED t8 tubes are built using the latest LED technology. Tubes are using high output SMD LED's producing 2,340 Lumens. Option of 4,000K (DLC Listed), 5,000K (DLC Listed), or 6000K (NOT DLC Listed) kelvin. Option of clear or frosted lens cover.  LED T8 using less than half the energy, and  lasting five times as long as a fluorescent. Please note our tubes are the higher quality version with a true aluminum backed heat sink. Our tubes are not the lower quality all plastic or all glass tube found on other web sites.
As a ballast by-pass dual end power connection no tombstone (receptacle) modification or replacement is necessary. As as ballast by-pass single end power connection a shunted tombstone would need to be replaced with NON shunted tombstone. LED T8 tubes are very bright, no flickering, no hum or buzz. Instant on and off. Tubes require no warm up.
Product is DLC Listed which makes it eligible for rebates from participating utility companies. We back our quality with a industry leading 10 year warranty. We have been offering LED T8 tubes since 2007. We know our stuff. Our tubes have less than 1/2 of 1 percent failure or returns in that time period.
 
Product Technical Data:

• SKU: GS-T8-4-W-423
• Ref: 423
• Brand: Global
• Wattage: 18
• Replaces: 45 Watt Fluorescent
• Lumens: 2340
• Kelvin: 4000K, 5000K, or 6000K
• Volts: 100-277V AC
• 480 Option: No
• Diameter: 1 Inch
• Length: 48 Inches
• Base: G13 Bi Pin
• Light Source: LED
• LED Type: High Output SMD
• CRI: 80
• Beam Angle: 180 Degrees
• Dimmable:
• Driver: Internal
• DLC Listed: Yes
• MFG: JEN LIGHTING CORP.
• MFG Part No: JN-T8-18P4FT-B5000K
• DLC ID: PL2N3S06HNIP
• ETL Listed:
• UL Listed: Yes
• Life Time: 50,000 Hours
• Warranty: 10 Years

4 Foot LED T8 Tube, Ballast By-Pass, Replace 45 Watt Fluorescent, Using Only 18 Watts, 2340 Lumen, UL, DLC Listed, 5 Pack

(86 reviews) Write a Review
$49.50
SKU:
GS-T8-4-W-423
Ref:
423
Call Us:
(800) 541-5006

4 Foot LED T8, Replaces 45 Watt Fluorescent, Ballast By-Pass, Using only 18 Watts, DLC Listed, 5 Pack.

LED four foot LED T8 tube can fit existing fixtures by-passing/removing current ballast. Great feature in that LED Tube can be rewired ballast by-pass as a single or double ended wire power connection. Our LED t8 tubes are built using the latest LED technology. Tubes are using high output SMD LED's producing 2,340 Lumen. Option of 4,000K (DLC Listed), 5,000K (DLC Listed), or 6000K (NOT DLC Listed) kelvin. Option of clear or frosted lens cover. LED T8 using less than half the energy, and lasting five times as long as a fluorescent. Please note our tubes are the higher quality version with a true aluminum backed heat sink. Our tubes are not the lower quality all plastic or all glass tube found on other web sites.
As a ballast by-pass dual end power connection no tombstone (receptacle) modification or replacement is necessary. As as ballast by-pass single end power connection a shunted tombstone would need to be replaced with NON shunted tombstone. LED T8 tubes are very bright, no flickering, no hum or buzz. Instant on and off. Tubes require no warm up.
Product is DLC Listed which makes it eligible for rebates from participating utility companies. We back our quality with a industry leading 10 year warranty. We have been offering LED T8 tubes since 2007. We know our stuff. Our tubes have less than 1/2 of 1 percent failure or returns in that time period.

 
Product Technical Data:

SKU: GS-T8-4-W-423
• Ref: 423
• Brand: Global
• Wattage: 18
• Replaces: 45 Watt Fluorescent
• Lumens: 2,340
• Kelvin: 4000K, 5000K, or 6000K
• Volts: 100-277V AC
• 480 Option: No
• Diameter: 1 Inch
• Length: 48 Inches
• Base: G13 Bi Pin
• Light Source: LED
• LED Type: High Output SMD
• CRI: 80
• Beam Angle: 180 Degrees
• Dimmable: No
• Driver: Internal
• DLC Listed: Yes
• MFG: JEN LIGHTING CORP.
• MFG Part No: JN-T8-18P4FT-B5000K
• DLC ID: PL2N3S06HNIP
• UL Listed: Yes
• Life Time: 50,000 Hours
• Warranty: 5 Years

Product Inquiries: 
SKU: GS-GS-T8-4-W-423
(800) 541-5006 <TapToCall 

Sign-In/Create Account
Instant Message Us
Home Page

Write a Review

86 Reviews Hide Reviews Show Reviews

  • 4 foot LED Bulb
    5

    Posted by Unknown on 12th Jan 2017

    Easy to install, amazing bright light

  • 50 watt led flood
    5

    Posted by Joel Blake, Flying Eagle Electric Co. on 24th Nov 2016

    The 50 watt led flood has a solid construction and appears to be a great product. I am unable to give an opinion on the light at this time due to only installing it a few weeks. The light is guaranteed for 5 years, so I will give another review in about a year.
    Compared to previous 50 watt led flood lights I have purchased, this light is superior.
    Other 50 watt led floods I have purchased were not near the construction or brightness of this product and only lasted for about six months.
    The company service is excellent.

  • good clean light sorce
    5

    Posted by Unknown on 7th Jul 2016

    easy to retro fit to existing light, good clean light sorce

  • Quick and Easy
    5

    Posted by Sasquatch on 16th May 2016

    Easy to remove ballast and replace fluorescent bulbs. Quick turn around on shipping. I live on the opposite coast and still received them in just a few days.

  • Solved Flourescent Ballast Problems
    5

    Posted by Lanny on 26th Feb 2016

    I am replacing all of the fluorescent fixture bulbs in my house with LED tubes. These tubes fit the existing fluorescent fixtures, using 2 pin connectors. They also eliminate the need for ballasts, which are expensive and tedious to replace. The LED bulbs are brighter than the old fluorescent tubes, and can be ordered in either clear or frosted glass, depending on your situation. I am very pleased with the LED bulbs and know they are use less electricity, saving me money and aggravation!

  • Great light output!
    5

    Posted by Unknown on 1st Feb 2016

    Very satisfied with our new bulb purchase for our store. Unlike fluorescent lights these bulbs shine directly down to our product with a crisper, brighter light.

  • Easy modification, great light output
    5

    Posted by Unknown on 1st Feb 2016

    I just installed 12 of these in 7 light fixtures. If you have basic electrical skills, the modification is simple. I was able to do fixtures in about 10 minutes apiece on the ceiling and about 5 minutes apiece on the bench. A screwdriver, diagonal cutters, wire strippers and wire nuts are all that are needed.

    I was able to replace 10 fluorescent bulbs in the garage with 6 of the 6500k LEDs and get better overall light than I had (I&#039;m adding two more LEDs for the extra light).

    I had 8 bulbs in two ceiling fixtures in the kitchen, I needed to replace those with 6 LED bulbs to get the same light, just because of the combination of the fixture design, the diffuser and the narrower field of view of the LED bulbs.

    Couple of suggestions: Where you have bare bulbs (like hanging fixtures in the garage), get the milky covers, the clear would be too harsh. Where you have diffusers built into the fixture, use the clear covers, the combination of the milky cover and diffuser would diffuse the light too much (in my opinion).

    Finally, for work areas, I would suggest a mixture of 3500k and 6500k lights, I unintentionally ended up with this over my benches in the garage and the combined light is much easier on the eyes. I&#039;m ordering 3500k bulbs for my kitchen as a result of that.

  • Great Product
    5

    Posted by Arturo Rodriquez on 22nd Jan 2016

    Great Product and Great Service with fast delivery to boot.

  • Just the Kelvin we Needed
    5

    Posted by Richard Allen on 22nd Jan 2016

    There are many LED 4 Foot Tubes on the Internet.Problem is the majority of them are 4100K and Single Ended Power Connection
    LED Global was one of just a very few who offers a 6000K Dual Ended Power 4 Foot Tube.
    We needed 6000K for the Daylight White Color for our Manufacturing Facility. Also the Dual Ended Connection is a easy modification without messing with the tombstones

  • the best and easiest way to led lighting for my business
    5

    Posted by michael @ Suds City Laundromat in Sussex, NJ on 3rd Jan 2016

    Never thought I could do it myself,but have changed almost 27, 4ft, 4 bulb troffers to led .

  • Product is good.
    5

    Posted by Unknown on 26th Dec 2015

    I find the product good and as advertised, but the few issues I have had have been dealt with by the company fast and at their cost. They should get 5 stars for customer service. Would use again and recommend to others.

  • Wonderful customer service
    5

    Posted by Unknown on 12th Dec 2015

    These tubes were just what we wanted for office lighting. Excellent light color and easy installation. Talking with Austin in customer service was always awesome.

LED GLOBAL SUPPLY 30 DAY RETURN POLICY
Our products are of high quality. We strive to insure that our customers are completely satisfied with their purchase. If you are not satisfied with your product, you may request to return the merchandise for a refund within 30 days of the original invoice date.

If your return qualifies, we will issue an RMA number and provide you with an address and return instructions. We must receive the product within 14 days of our RMA issuance-authorization.

*You may return your purchase within 30 days of invoice date, subject to the following:

1. All returns must be approved by LED Global Supply. The "Return Merchandise Authorization" (RMA) number you are issued must be clearly marked on the outside of your return shipment package. Returns received without RMA Authorization will be rejected. We are not responsible for product returned without an RMA number.
2. All returns and exchanges must include a copy of the invoice or order number.
3. Return product within the 30 day time period must not show damage, writing or markings on product or its box, excessive use or modified in any way.
4. Products must be in their original cartons and boxes, and shipped with sufficient packaging material to ensure that they are resalable.
5. All ancillary items must also be returned and be in salable condition.
6. Return shipping is the responsibility of the customer.
7. Credit card processing fees may not be refundable.
8. Special orders, custom kelvin temperatures and custom beam angle products are sold as a final sale. These products are non-returnable and non-refundable under any circumstances. No exceptions.
9. Product returned after 30 days, may be subject to a restocking fee of 20%.
10. Cost of the shipping will be withheld from the refund for products without manufacturer's defect.
11. For Replacement RMA, LED Global Supply reserves the right to substitute comparable brands and styles, and repair or refurbish warranty products if necessary, to satisfy the warranty exchange, based on stock on hand.
12. No product will be accepted for return, exchange or credit if there is writing on the product or its packaged box. No exceptions.

CANCELLATIONS:
If you would like to cancel a lighting order and we are able to do so before it ships, there will be no additional cost. If your order has shipped, it cannot be cancelled and is subject to the return policy.

WARRANTY:
All LED Global Supply products are warranted against defective parts, labor and materials.
Warranty does not cover incorrect installation, misuse, abuse, acts of god or animal-insect infestation. No product will be accepted under warranty if there is writing on product or product packaging. Product returned showing any visible damage will void warranty and not be accepted for replacement or refund. No Exceptions.

If your product fails within the warranty period:
Call our Toll Free number at (800) 541-5006.
Or use our online RMA Request Form Here.

Customer service will review your request, will issue an RMA number for return of product for credit or replacement. Once approved RMA product is received and verified as ours: Replacement products ship at no freight cost to the customer. Advanced RMA replacements require Credit Card on file.

ORDERS
:

LED Lighting orders can be placed online or by calling us Toll Free at: (800) 541­-5006. Phone orders can be placed from 8 am to 5pm (PST) Monday through Friday.
For larger orders, we encourage you to call for assistance to insure your order is correct.
Feel free to order online anytime.

CUSTOM LED LIGHTING:
LED Global Supply can offer special orders, such as custom kelvins and beam angles. Extra lead times may apply.

SUPPORT SERVICES:
If you have any questions about your order, email them to info@ledglobalsupply.com
Email all technical assistance questions to: sales@ ledglobalsupply.com - Your email will be answered by our Technical Department within 24 hours.

SHIPPING:

We Do Not Ship To P.O. Boxes.

Since we are an Internet Based LED Sales Company, our inventory is dynamic and subject to change at any time. Larger quantities may require additional lead time for shipping. Orders will ship UPS or FED EX Ground. Expedited shipping is available upon request. *Expedited shipping must be requested by phone to confirm additional costs. Special rates would apply.

RETURN & SHIPPING REQUIREMENTS:

1. Returns must have the RMA number on the outside of the return shipment package.
2. Returns received without an RMA number will be returned/refused.
3. Do not write on products or product boxes.

RETURN PRODUCTS TO:
LED GLOBAL SUPPLY INC.
2248 TOWNSGATE ROAD, UNIT #4
WESTLAKE VILLAGE CA 91361

Toll Free: (800) 541-5006
Email: rma@ledglobalsupply.com
Web: https://ledglobalsupply.com/

Fast Help Instant Us Message Here

Related Products

Featured Clients